, , ,

Atmel ATMEGA328P-PU Microcontroller DIP28 Package

  • The Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture.
  • By executing powerful instructions in a single clock cycle, the ATmega328/P achieves throughputs close to 1MIPS per MHz.
  • This empowers system designer to optimize the device for power consumption versus processing speed.
  • ATMEGA328P in DIP28
Availability:

Out of stock

280

Out of stock

Atmel ATMEGA328P-PU Microcontroller DIP28 Package Price in Pakistan

High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family

  • Advanced RISC Architecture
  • 131 Powerful Instructions
  • Most Single Clock Cycle Execution
  • 32 x 8 General Purpose Working Registers
  • Fully Static Operation
  • Up to 20 MIPS Throughput at 20MHz
  • On-chip 2-cycle Multiplier
  • High Endurance Non-volatile Memory Segments
  • 32KBytes of In-System Self-Programmable Flash program Memory
  • 1KBytes EEPROM
  • 2KBytes Internal SRAM
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
  • Data Retention: 20 years at 85°C/100 years at 25°C(1)
  • Optional Boot Code Section with Independent Lock Bits
  • In-System Programming by On-chip Boot Program
  • True Read-While-Write Operation
  • Programming Lock for Software Security
  • Atmel® QTouch® Library Support
    • Capacitive Touch Buttons, Sliders and Wheels
    • QTouch and QMatrix® Acquisition
    • Up to 64 sense channels
  • Atmel-42735B-ATmega328/P_Datasheet_Complete-11/2016
  • Peripheral Features
    • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
    • Real Time Counter with Separate Oscillator
    • Six PWM Channels
    • 8-channel 10-bit ADC in TQFP and QFN/MLF package
    • Temperature Measurement
    • 6-channel 10-bit ADC in PDIP Package
    • Two Master/Slave SPI Serial Interface
    • One Programmable Serial USART
    • One Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
    • Programmable Watchdog Timer with Separate On-chip Oscillator
    • One On-chip Analog Comparator
    • Interrupt and Wake-up on Pin Change
  •  Special Microcontroller Features
    • Power-on Reset and Programmable Brown-out Detection
    • Internal Calibrated Oscillator
    • External and Internal Interrupt Sources
    • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and
  • Extended Standby
  • I/O and Packages
    • 23 Programmable I/O Lines
    • 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
    • Operating Voltage:
    • 1.8 – 5.5V
    • Temperature Range:
    • -40°C to 105°C
    • Speed Grade:
    • 0 – 4MHz @ 1.8 – 5.5V
    • 0 – 10MHz @ 2.7 – 5.5V
    • 0 – 20MHz @ 4.5 – 5.5V
  • Power Consumption at 1MHz, 1.8V, 25°C
    • Active Mode: 0.2mA
    • Power-down Mode: 0.1μA
    • Power-save Mode: 0.75μA (Including 32kHz RTC

Package Includes

  • 1 x Atmel ATMEGA328P-PU Microcontroller DIP28 Package

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Atmel ATMEGA328P-PU Microcontroller DIP28 Package”

There are no reviews yet.