2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
ESP8285 ESP-M3 Wifi Serial Transceiver Module
Features:
- Breadboard Friendly
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
- Built-in TCP / IP protocol stack
- Built-in 1-channel 10-bit high-precision ADC
- Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- The deep sleep hold current is 10uA and the shutdown current is less than 5uA
- Wake up within 2 ms, connect and pass the packet
- Standby power consumption less than 1.0mW (DTIM3)
- Built-in 1M bytes of SPI Flash
Availability:
2 in stock
₨900
2 in stock
ESP8285 ESP-M3 Wifi Serial Transceiver Module Price in Pakistan
ESP8285 = ESP8266 + 1M Flash, so that it can withstand high temperatures up to 125 degrees Celsius! And the original ESP8266 source code program can be used to transplant. This module is breadboard Friendly.
ESP-M3 module core processor using cost-effective chip ESP8285. The chip integrates the enhanced version of the Tensilica’s L106 Diamond 32-bit core processor with on-chip SRAM in a smaller package. ESP8285 has a complete Wi-Fi network function, both can be used independently, can also be used as a slave from other host MCU running. When the ESP8285 hosting application, can be started directly from the external Flash. Built-in cache memory facilitates system performance and optimizes storage systems. In addition, ESP8285 only through the SPI / SDIO interface or I2C / UART port can be used as a Wi-Fi adapter, applied to any microcontroller-based design.
Module Peripherals
- 2xUART
- 1xADC
- 1xEn
- 1x wakeup pin
- 1xHSPI
- 1xI2C
- 1xI2S
- Up to 10xGPIOs
Wi-Fi Features
- Supports 802.11 b / g / n / e / i
- Support Station, SoftAP, SoftAP + STA mode
- Support for Wi-Fi Direct (P2P)
- Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
- P2P discovery, P2P GO mode / GC mode and P2P power management
- WPA / PA2 PSK and WPS
- 802.11 i security features: pre-authentication and TSN
- Hold 802.11n (2.4 GHz)
- 802.1h / RFC1042 frame encapsulation
- Seamless roaming support
- Support AT remote upgrade and cloud OTA upgrade
- Support for Smart Config features (including Android and iOS devices)
Features
- Supports NodeMCU & Arduino IDE for programming.
- Breadboard Friendly
- The volume is ultra-small;
- Serial to WiFi;
- Wireless transmission;
- Long-range ultra-low power consumption;
- High temperature, up to 125 ℃
- Fully compatible with ESP8266, the source can be used to transplant.
Package Includes
- 1 x ESP8285 ESP-M3 Wifi Serial Transceiver Module
There are no reviews yet.