No products in the cart.
Power Price in Pakistan
Showing 25–48 of 152 results
- Components, IC, Power, Power Management, Transistor, Voltage Converters
TL431A TL431 SOT-23 Voltage Refrence Power Supply Feedback Regulator
Components, IC, Power, Power Management, Transistor, Voltage ConvertersTL431A TL431 SOT-23 Voltage Refrence Power Supply Feedback Regulator
TL431A is a power supply feedback transistor chip used in variety of ac to dc switching power supplies.
- Part Number: TL431A
- Programmable output voltage upto 2.5v to 40v
- Output voltage can be set by 2 resistor divider between Positive & Negative output of the supply.
SKU: n/a - Modules, Power, Voltage Converters
LM2596 LM2596S DC-DC Converter Step-Down Module
- Module property:Non-isolation buck
- Rectification mode:Non-synchronous rectifier
- Input voltage:3V-40V
- Output voltage:1.3V-35V
- Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
- Conversion efficiency:92%( highest )
- Switching frequency:65KHz
- Output ripple:30mV( maximum )
- Load regulation:±0.5%
- Voltage regulation:± 2.5%
- Work temperature:-Minus 40 degrees – 85 degrees
- dimension:43mm*21mm*14mm(L*W*G)
SKU: n/a - Inverters, Modules, Power
EGS002 EG8010 + IR2113 Pure Sine Wave Inverter SPWM Module
- 5V single power supply
- 4 pin set of pure sine wave output frequency:
- 50Hz pure sine wave of fixed frequency of 60Hz pure sine wave of fixed frequency 0-100Hz
- pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
- Unipolar and bipolar modulation
- 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
- External 12MHz crystal oscillator
- PWM carrier frequency 23.4KHz
- Voltage, current, real time temperature feedback
- Overvoltage, undervoltage, overcurrent and overheating protection
- Soft-start mode pin setting the response time of 1S
- Serial communication to set the output voltage, frequency and other parameters
- External Serial LCD Module 1602 displays the inverter
- voltage, frequency, temperature and current information
SKU: n/a - Components, Power, Voltage Converters, Voltage Regulators
L7812CV LM7812 L7812 TO-220 12V 1.5A Voltage Regulator
Components, Power, Voltage Converters, Voltage RegulatorsL7812CV LM7812 L7812 TO-220 12V 1.5A Voltage Regulator
- Input voltage: upto 20V
- Minimum Input Voltage: 14V
- Maximum input voltage: 35V
- Fixed Output Voltage: 12V
- Pressure drop: 2V
- Output channel number: 1
- Number of Pins: 3
- 1 Input
- 2 Ground
- 3 Output
SKU: n/a - Power, Voltage Converters
AC-DC 5V 700mA 3.5W Isolated Transformer Power Supply
- Input voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 v
- Input current: 0.0273A(AC110V) 0.014A(AC220V)
- Input Inrush Current: 20A
- Output voltage: DC 5V (+ / – 0.2 V)
- Output current 700 mA
- Power 3.5 W
- Operating temperature -20~60 degree
- Relative humidity 40-90%RH
- Output 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mV
- Output power:0-4W(DC current)
- Output efficiency: 80%
SKU: n/a - Components, Power, Voltage Converters, Voltage Regulators
AOZ1212AI Z1212AI Highly Efficient 3A Buck Voltage Regulator IC
Components, Power, Voltage Converters, Voltage RegulatorsAOZ1212AI Z1212AI Highly Efficient 3A Buck Voltage Regulator IC
- The AOZ1212 is a high efficiency, simple to use.
- 3A buck regulator flexible enough to be optimized for a variety of applications.
- The AOZ1212 works from a 4.5V to 27V input voltage range.
- Provides up to 3A of continuous output current on each buck regulator output.
- The output voltage is adjustable down to 0.8V
SKU: n/a - Modules, Power, Voltage Converters
XL7015 5V-80V Input DC-DC Converter Step-Down Module
- PINOUTS
- VIN: Input voltage (5 v – 80v)
- The GND: Input Voltage GND
- The VOUT: Output Voltage (5 v – 20 v)
- The GND: Output Voltage GND
- 5 v to 80v Wide Input Voltage Range
- Shut off built-in Overheating Protection
- Output Short Circuit Protection
- Over Current Protection
- Good linear with load regulation
- The board size: 16 mm * 44 mm
SKU: n/a - PINOUTS
- Modules, Power, Voltage Converters
0.9V ~ 5V to 5V 600MA USB Output Charger Module
- The onboard subminiature PFM control DC/DC boost controller chip
- Any input 0.9 V ~ 5 V dc voltage, stable output 5 V dc voltage
- The onboard USB female, can be directly to the USB interface equipment power supply
- The onboard the input voltage indicator light
- PCB size: 34 x16.2 (mm) (mm)
- Works with all types of Lipo & Lithium batteries for example 18650 bl5c bl5b
- Charge cellphone or power up your USB Gadgets
SKU: n/a - Arduino Components, Modules, Power, Tools
Digital Voltmeter Panel LED Display 3-30V DC
- Feature:Reverse Connect Protection
- Range: DC3.0-30V (No need aditional power)
- Display: Three 0.56” LED digital tube
- Display color: red
- Refresh rate: about 500mS / times
- Input: DC voltage (<2 times the range)
- Resolution: 1% +1 digit
- Power Supply: DC3.0-30V (with the input common-line)
- Operating temperature: -10°c~ 65°c
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 12V
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 12V
- Input Voltage: DC 12V
- Operating Voltage: 1 – 250 V
- RF Frequency: 433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold separately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
SKU: n/a - Components, IC, Power, Voltage Converters
SD6834 PWM PFM Power Management IC
- SD6834 is current mode PWM+PFM controller with built-in high-voltage MOSFET used for SMPS.
- It features low standby power and low start current. In standby mode, the circuit enters burst mode to reduce the standby power dissipation.
- The switch frequency is 25~67KHz decided by the load with jitter frequency for low EMI.
- Built-in peak current compensation circuit makes the limit peak current stable even with different input AC voltage.
- Maximum peak current compensation during power-on reduces pressure on transformer to avoid saturation, the peak current compensation will decrease for balance after power-on.
- Limit output current can be adjusted through the resistor connected to CS
SKU: n/a - Modules, Power, Voltage Converters
DC-DC 300W 9A Step Down Buck Converter CC-CV
- Color: as the pic shows
- Input voltage: 5-40V
- Output voltage: 1.2-35V (continuously adjustable)
- Output Current: 9A (if temperature exceeds 65°C please add cooling fan)
- Constant current range:0.2-9A ( adjustable )
- Output Power: Maximum power is about 300W (if temperature exceeds 65°C please add cooling fan)
- Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
SKU: n/a - Power, Voltage Converters
Dual USB 18650 Battery Charger Module for Power Bank
- Motherboard comes with protection function: Charging overcharge protection,
- Over-discharge protection, overcurrent protection.
- Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge.
- Output voltage and current stable, will not harm user devices.
- Micro USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) or any other 3.7-4.2v Batteries
- Product Size: 57mm x 28mm
- Screen size:27mm x 17mm
SKU: n/a - Modules, Power, Relays
Automatic Street Light On Off Photo Sensor Control Switch 220V 10A
- This Switch can be used to Automatically Turn ON & OFF Street Light & Garage Lights Based on Sun light Intensity
- For example It will turn on the lights when there is no sun light detected in the evening.
- It will automatically turn off the lights early in the morning when the sunlight detected.
- Power Saving & Energy Efficient Device
- This device Have some other uses as well.
- For example if you are using Wapda & Solar Power, You can cut off Wapda Load from UPS & Automatically Switch to Solar Energy
- When the Sunlight detected it means Solar Power is available (It kills Wapda Power & Switch to Solar Power)
- When the Sunlight not detected, that means the Solar Power is not available (It will Restore Wapda Power to UPS)
- It has built in Relay Module Which Supports 220V & 10A (Ideal Load for average Home UPS)
SKU: n/a - Arduino, Robotics
S30K DC 12V 14RPM High Torque Geared Reduction Motor
- Gear Reduction has a large Torque & Small Noise.
- Suitable for Electric Toys, Handicrafts, Rotating Table Box, DC Shaking Head Fans, Display, etc.
- By changing the sign of the motor wiring you can change the rotation direction of the motor.
- Voltage: DC12V
- Load Speed: 14R / min
- Output Torque: 1.2kg*cm
- Very Very Powerfull (You can not stop it with hand while its rotating)
SKU: n/a
