No products in the cart.
Modules Price in Pakistan
Showing 1–24 of 172 results
- Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209 LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209 LED Digital Thermostat Temperature Control
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Modules, Power, Voltage Converters
TP4056 03962A Lithium Battery Charger with Protection Module
- Current- 1A adjustable.
- Charge precision- 1.5%.
- Input voltage- 4.5V-5.5V.
- Full charge voltage- 4.2V.
- Led indicator- red is charging Green is full charged.
- Input interface- micro USB & welding points
- Work temperature- -10° to +85°.
- Reverse polarity protection: No
- Size- small to 25X19X10mm.
- works with all types of lipo & lithium batteries like 18650
- Connect Battery with B+ & B-
- Connect Battery load OUT+ & OUT – (this is uninterrupted power supply)
SKU: n/a - Components, Modules
PAM8610 Digital Amplifier Board 15W x 2
- 2 * 15W D Class
- Supply voltage: DC 7V-15V
- Output power: 10w + 10w (8 load)
- Efficiency: 90%
- Shutdown Current: 4uA
- Quiescent current; 20mA
- SNR: 86%
- Total harmonic distortion: 5W / 1KHz / 8 —- 0.1%
- Frequency range: 20Hz-20KHz
- Input impedance: 15K
- Output Impedance: 4-8
- Amplifier board size: 30mm * 25mm * 2.5mm
SKU: n/a - Components, Modules
TPA3116D2 Digital HIFI Power Amplifier Board 2 X 120W
- Input Voltage 5-28V (more than 28V overvoltage protection)
- Support for low power 5V such as USB power supply
- Can also support high power 28V such as dual battery power supply
- Recommended power supply DC24V peak current 6A
- Output Maximum Power Up to 120W per channel
- Support 4 -8 Ohm speaker
SKU: n/a - Modules, Power, Voltage Converters
XL6009 DC-DC Boost Step Up Module
- Input Range: 3V to 32V
- Output Range: 5V ~ 35V Adjustable with onboard Potentiometer
- Input Current: 4A Max
- Conversion Efficiency: <94%
- Switching Frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Operating Temperature: -40 ° ~ +85 °
- Dimensions: 43mm * 21mm * 14mm (L * W * H)
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
USB to RS485 TTL Serial Converter Adapter
Components, Modules, Programmer Accessories, Wires and CablesUSB to RS485 TTL Serial Converter Adapter
- USB to RS485 Converter Adapter
- No need External Power, Powered by USB port
- Fully Compliant USB 2.0 Standard , Backward Compatible With USB 1.1
- Support System: Windows, Linux, MAC
- Supports Baud Rate Range : 75bps – 115200bps , up to 6Mbps
- Communication Distance :1200m(max)
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
RS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Adapter
Components, Modules, Programmer Accessories, Wires and CablesRS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Adapter
- USB to RS232 Converters DB9 Male (Adapter)
- Chipset: CH340G
- Uses:
- Dish Receiver Software Upgrade
- Other DB9 Supported Devices Firmware Update
- GPS/Navigation USB Interface
- Point-of-Sale (POS) Terminals/Printers
- USB Modem/Wireless/Zigbee USB Interface
- USB Specification revision 1.1&2.0 compliant
- Support RS232 Serial Interface (both DB25 and DB9)
- Support Over 1Mbps Data Transfer Rate
- Support Remote Wake-Up and Power Management
- Support Windows MAC & Linux
SKU: n/a - Arduino, Arduino Components, Modules, Programmers
USB to Serial TTL Converter CP2102
- This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & +5V.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
SKU: n/a - Inverters, Modules, Power
EGS002 EG8010 + IR2113 Pure Sine Wave Inverter SPWM Module
- 5V single power supply
- 4 pin set of pure sine wave output frequency:
- 50Hz pure sine wave of fixed frequency of 60Hz pure sine wave of fixed frequency 0-100Hz
- pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
- Unipolar and bipolar modulation
- 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
- External 12MHz crystal oscillator
- PWM carrier frequency 23.4KHz
- Voltage, current, real time temperature feedback
- Overvoltage, undervoltage, overcurrent and overheating protection
- Soft-start mode pin setting the response time of 1S
- Serial communication to set the output voltage, frequency and other parameters
- External Serial LCD Module 1602 displays the inverter
- voltage, frequency, temperature and current information
SKU: n/a - Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Timer Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Timer Control Relay
- Operating voltage: 6–30V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
- Output capability: You can control the DC 30VDC 5A or 220VAC 5A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85 ; Size:
- With Optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
433Mhz RF Receiver Learning Code Decoder Module
433 Mhz, Arduino, Arduino Components, Modules, Wireless433Mhz RF Receiver Learning Code Decoder Module
- Button usage (set the mode and starts pairing process):
- Press the button 8 times to clear previously stored codes
- Then press again onece, twice, or three time according to your configuration
- Press once: Inching mode (Momentary Mode)
- Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
- Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
SKU: n/a - Modules, Power, Voltage Converters
LM2596 LM2596S DC-DC Converter Step-Down Module
- Module property:Non-isolation buck
- Rectification mode:Non-synchronous rectifier
- Input voltage:3V-40V
- Output voltage:1.3V-35V
- Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
- Conversion efficiency:92%( highest )
- Switching frequency:65KHz
- Output ripple:30mV( maximum )
- Load regulation:±0.5%
- Voltage regulation:± 2.5%
- Work temperature:-Minus 40 degrees – 85 degrees
- dimension:43mm*21mm*14mm(L*W*G)
SKU: n/a - Arduino, Arduino Components, Modules, Sensors, Wireless
GY-NEO6MV2 GPS Module RS232 TTL Output
- Voltage: 3.3 V-5 V
- Size: 36mm * 24mm
- Baud-rate default: 9600bps
- Preconfigured: Just give it power & it will start transmitting GPS data on tx pin
- Compatible with Arduino PIC AVR etc
- Export & view on Google Maps
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
RS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Cable
Components, Modules, Programmer Accessories, Wires and CablesRS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Cable
- USB to RS232 Converters DB9 Male (Adapter)
- Chipset: CH340G
- Uses:
- Dish Receiver Software Upgrade
- Other DB9 Supported Devices Firmware Update
- GPS/Navigation USB Interface
- Point-of-Sale (POS) Terminals/Printers
- USB Modem/Wireless/Zigbee USB Interface
- USB Specification revision 1.1&2.0 compliant
- Support RS232 Serial Interface (both DB25 and DB9)
- Support Over 1Mbps Data Transfer Rate
- Support Remote Wake-Up and Power Management
- Support Windows MAC & Linux
SKU: n/a
