Arduino Price in Pakistan
Showing 97–120 of 140 results
- Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Arduino, Arduino Boards, Development Boards, Modules
Arduino MEGA2560 With CH340G
- Microcontroller Atmega2560
- Serial Controller CH340 / Ch340G
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM Output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by Bootloader
- SRAM 8 KB
- EEPROM 4 KB
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Programming Board
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- 32 I/O pin all the leads.
- Classic ATmega16/32 minimum system, eliminating the hassle of soldering.
- Crystal: The socket hole welding facilitate the buyer to replace the crystal, 8M crystal.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Expand outside 4 channel VCC, GND.
- Reset: Power-on reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a - Arduino, Arduino Components, Components, LED
WS2812 RGB LED Breakout Module
- This really blew our minds to see the control IC of an individually addressable RGB LED was moved into the actual LED
- So we wanted to offer this amazing product to you
- They’re great when you need a lot of color from not a lot of board space
SKU: n/a - Arduino, Arduino Components, Sensors
DHT11 Temperature & Humidity Sensor
- DHT Series Digital Temperature and Humidity Sensor
- Full scale calibration, digital output
- Humidity Measurement Range: 20% to 9 0%RH (0-50 ° C temperature compensation)
- Temperature Measurement Range: 0 to +50 ° C
- Humidity Measurement Accuracy: Measurement Accuracy of ± 5.0% RH Temperature: ± 2 ° C
- Response time: <5 seconds
- Ultra Low Power Consumption
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Espressif, Modules, Wireless
ESP8266 07 Wifi Module
- Improve the peripheral circuit
- Enhanced impedance matching
- Signal output is better, whether it is stable or anti jamming ability
- IPEX Connector For External Antenna
- PCB antenna after professional laboratory testing, perfect matching, after ROHS certification, have been greatly improved!
- The enhanced version is fully compatible with the firmware before the ESP-12, based on the SPI and the new six IO port
- Development is more convenient, more widely used!
- Node MCU Compatible
- Arduino IDE Compatible
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Board
- Crystal 11.0592 Mhz
- Supported Microcontroller: STC89c52 STC12C5A60S2 STC11/10x series, AT89S52 & All other pins compatible MCUs.
- 5v Power in socket
- a power switch
- 2-way expansion pins of VCC & GND
- built in all parts, compact size full features.
- Board Size: 6.5cm x 3.1cm
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
M590E GPRS GSM Module Dual Band
- Ready to use module
- Chip: M590E
- Voltage: 5v
- Best for SMS GPRS
- Support networks: GSM 900 & GSM 1800 Network
- Module size: 50mm*50mm
- TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
- Power module automatically boot on home network
- Onboard status LED.
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
ESP8285 ESP-M3 Wifi Serial Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Modules, WirelessESP8285 ESP-M3 Wifi Serial Transceiver Module
Features:
- Breadboard Friendly
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
- Built-in TCP / IP protocol stack
- Built-in 1-channel 10-bit high-precision ADC
- Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- The deep sleep hold current is 10uA and the shutdown current is less than 5uA
- Wake up within 2 ms, connect and pass the packet
- Standby power consumption less than 1.0mW (DTIM3)
- Built-in 1M bytes of SPI Flash
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, Wireless
ESP-201 ESP8266-201 Wifi Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, WirelessESP-201 ESP8266-201 Wifi Transceiver Module
- ESP8266 – 201 WIFI Wireless Transceiver Module
- Compatible with Arduino IDE & NodeMCU
- Condition: New
- Can be used as the IO module
- All IO lead out
- With antenna, farther than others
- IPX interface on board
- Low power consumption
SKU: n/a