No products in the cart.
Arduino Components Price in Pakistan
Showing 25–48 of 130 results
- Arduino, Arduino Components, Arduino Shields, Modules
DRV8825 3D Printer Stepper Motor Driver Module
- It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
- Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
- Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32.
- A simple steps and direction control interface.
- Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate.
- Automatic current decay mode detection / selection.
- Thermal shutdown circuit, undervoltage lockout, crossover current protection.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz Wireless Remote Control 4 Channel Silver
- Clone your existing 433mhz Remote Control Key FOB
- Working voltage: DC 12V (built-in button battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: <25ma
- Transmitting frequency: 433Mhz
- Key number: 4 Key (4 Channel)
- Emission Distance: 70-100m (Open area)
- Encoding type: fixed code (1527)
- Color: Silver Black
- Case material: Metal and PVC
SKU: n/a - Arduino, Arduino Components, Modules, Programmers, Tools
USB to Serial TTL Converter CH340G
- This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
- Supports Windows 98SE, 2000, XP, Vista, Window7,8,10 Mac OS 9, Mac OS X Linux 2.40.
SKU: n/a - Arduino, Arduino Components, Modules, Programmers
USBASP USBISP Programmer for ATMEL AVR ATMega ATTiny
Arduino, Arduino Components, Modules, ProgrammersUSBASP USBISP Programmer for ATMEL AVR ATMega ATTiny
- Directly connected to USB port of PC
- Easy interfacing with Microcontroller
- Onboard ATMEGA8A chip for programming
- onboard 500ma overcurrent protection fuse
- 3.3v & 5v supply for target
- Support All AVR ASP chips
- Autospeed, automatic adaptive serial speed control.
- Reserved MOSI, MISO, RST, SCK, VCC, GND 6PIN Interface
SKU: n/a - Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Real Time Clock RTC Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Real Time Clock RTC Control Relay
- Operating voltage: 5.0V ~ 60V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V),
- Output Capability: You can control the DC 30VDC 5A or 220VAC 10A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85
- This Module can be used to specifically Turn On / Turn Off an Electrical appliance on Specific Time for the specific duration
- This is Advanced Cyclic Timer Relay Module with Timer Clock function as well
SKU: n/a - Arduino, Arduino Components, Modules, Programmers
CP2102 USB to Serial TTL Converter Micro USB
- Origional CP2102 IC Chip onboard
- Micro USB 6PIN TTL UART CP2102 Module
- On board Fuse for Short Circuit Protection
- DTR Pin for Auto Programming
- Designed to be used for USB to TTL Serial
- Built-in USB to RS232 Transfer chip
- Micro USB to TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & +5V.
- Temperature Range: -40degree to +85degree.
- Support: Windows, Linux & MAC
SKU: n/a - Arduino Components, Modules, Power, Tools
Digital Panel Voltmeter 0.36 LED Display 0-100V DC
- Type: 3-Wire Car Digital Voltmeter
- Material: Plastic
- Operating Voltage: DC 2.5-30V
- Operating Current: <20mA
- Measure Voltage: DC 0-100V
- Minimum Resolution: 0.1V / 0.01V
- Display: Red color, three digit, 0.36″
- Refresh Rate: About 200mS / times
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Components, Connectors, Wireless
433MHz 5dbi Antenna SMA Male Plug with RG174
433 Mhz, Arduino, Arduino Components, Components, Connectors, Wireless433MHz 5dbi Antenna SMA Male Plug with RG174
- Frequency Range: 433+/-15MHz
- Bandwidth: 30MHz
- Max Gain: 5dBi
- Max Input Power: 60W
- Input Impedance: 50Ω
- Polarization Type Vertical
- Cable Length 1.5M
- Total length(From the top to base): 14.2cm/5.59″
- Base size: 3.5x3cm/1.38×1.18″(LxW)
- Cable Type: RG174
- Connector Type: SMA Male (Pin inside) Plug connector
- With Mounting Magnetic
SKU: n/a - Arduino, Arduino Components, Modules, Power, Robotics
NE555 PWM Pulse Signal Generator
- Used as a square wave signal generator
- offer the square wave signal for the use of the experimental development.
- Used to produce driving stepper motor drives, offer the square wave signal.
- Adjustable pulse for the use of MCU.
- Generate pulse with adjustable frequency & duty cycle.
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
HC-SR501 PIR Infrared Motion Sensor Detector Module
- Color: White + Green
- Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
- Infrared sensor with control circuit board
- The sensitivity and holding time can be adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current drain:<60uA
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
Infrared Reflective Obstacle Avoidance Sensor
- Sensor module output port OUT can be directly connected with the microcontroller IO port.
- Can also directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
- The Comparator with LM393, Stable.
- Can be used 3.3V-5V DC power supply module. When the power is turned on, the red power indicator light;
- VCC external 3.3V-5V voltage (can be directly connected with the 5v microcontroller or 3.3v single-chip)
- GND external GND
- OUT small board digital output interface (0 and 1)
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz RF Wireless Remote Control 4 Channel
- Clone your existing 433mhz Remote Control Key FOB
- Working voltage: DC 12V (built-in battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: <25ma
- Transmitting frequency: 433Mhz
- Key number: 4 Key (4 Channel)
- Emission Distance: 70-100m (Open area)
- Encoding type: fixed code (1527)
- Color: Silver Black
- Case material: Metal and PVC
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz RF Wireless Remote Control One Key
- Working voltage: DC 12V (built-in button battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: 10MA
- Transmitting frequency: 433Mhz
- Key number: 1 Key
- Emission Distance: 20-70m (Open area)
- Encoding type: fixed code (1527,1538)
- Oscillation resistance: 4.7m/15.42ft (Approx.)
- Size: (Dia×H) 4.5×1cm/1.77×0.39in (Approx.)
- Color: White
- Case material: Plastic
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz Wireless Remote Control 4 Channel Black
- Clone your existing 433mhz Remote Control Key FOB
- Working voltage: DC 12V (built-in button battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: <25ma
- Transmitting frequency: 433Mhz
- Key number: 4 Key (4 Channel)
- Emission Distance: 70-100m (Open area)
- Encoding type: fixed code (1527)
- Color: Black
- Case material: Metal and PVC
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW-420 Normally Closed Vibration Sensor Module
- The company produced normally closed type vibration sensor SW-420
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
- The working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Has a fixed bolt hole, convenient installation
- Small board PCB size: 3.2cm x 1.4cm
- Use the LM393 wide voltage comparator
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
SIM900A GPRS GSM Module
- Chip: SIM900A by SIMCOM
- Dual-Band 900/ 1800 MHz
- GPRS multi-slot class 10/8GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Dimensions: 24*24*3 mm
- Weight: 3.4g
- Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
- Supply voltage range : 5V
- Low power consumption: 1.5mA (sleep mode)
- Operation temperature: -40°C to +85 °
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209WK LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209WK LED Digital Thermostat Temperature Control
- Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Used for Incubation
SKU: n/a - Arduino, Arduino Components, Modules
DS1307 AT24C32 Real Time Clock module with EEPROM
- DS1307 Real Time Clock
- AT24C32 32K EEPROM
- Works with LIR2032 3.6v or CR2032 3.0v Battery (Not Included)
- The module comes fully assembled
- The DS1307 is accessed via the I2C protocol.
- Two wire I2C interface.
- Hour:Minutes : Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC
- 1Hz output pin.
- 56 Bytes of Non-volatile memory available to user.
- Size:2.9cm x 2.6cm – 1.14inch x 1.02inch.
SKU: n/a - Arduino, Arduino Boards, Arduino Components, Development Boards
Atmel ATMEGA328P-PU Microcontroller DIP28 Package
Arduino, Arduino Boards, Arduino Components, Development BoardsAtmel ATMEGA328P-PU Microcontroller DIP28 Package
- The Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture.
- By executing powerful instructions in a single clock cycle, the ATmega328/P achieves throughputs close to 1MIPS per MHz.
- This empowers system designer to optimize the device for power consumption versus processing speed.
- ATMEGA328P in DIP28
SKU: n/a - Arduino, Arduino Components, Components, Input, Modules
TTP224 4 Channel Digital Capacitive Touch Module
Arduino, Arduino Components, Components, Input, ModulesTTP224 4 Channel Digital Capacitive Touch Module
- Onboard TTP224 campacitive 4 key touch induction IC.
- Onboard the 4 way level indicator.
- Operating voltage:2.4V-5.5V.
- Module can set the output mode,output longest time,and fast/low power selection.
- PCB board size:35(mm)×29(mm).
Modes
- Toggle Mode
- Latch Mode
- Single Mode
SKU: n/a
