Arduino Components Price in Pakistan
Showing 1–24 of 130 results
- Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209 LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209 LED Digital Thermostat Temperature Control
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Arduino Components, Modules, Programmers
USB to Serial TTL Converter CP2102
- This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & +5V.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
SKU: n/a - Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Timer Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Timer Control Relay
- Operating voltage: 6–30V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
- Output capability: You can control the DC 30VDC 5A or 220VAC 5A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85 ; Size:
- With Optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
433Mhz RF Receiver Learning Code Decoder Module
433 Mhz, Arduino, Arduino Components, Modules, Wireless433Mhz RF Receiver Learning Code Decoder Module
- Button usage (set the mode and starts pairing process):
- Press the button 8 times to clear previously stored codes
- Then press again onece, twice, or three time according to your configuration
- Press once: Inching mode (Momentary Mode)
- Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
- Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz Wireless Remote Control 4 Channel
- Material: PVC
- RF Frequency: 433 Mhz
- Channel Supported: Four Channel
- Encoding Type: Learning Code(1527)
- Button: 4 Buttons
- Powered By: 27A 12V Battery (Battery Included )
- Modulation System: ASK
- Operating Voltage:DC12V
- Operating Current:<25mA
- Transmitting Power: +13dbm
- Frequency Windage: ±0.2MHz
- Transmission Distance: 70m – 100m (Free Space)
- Color: White
SKU: n/a - Arduino, Arduino Components, Modules, Sensors, Wireless
GY-NEO6MV2 GPS Module RS232 TTL Output
- Voltage: 3.3 V-5 V
- Size: 36mm * 24mm
- Baud-rate default: 9600bps
- Preconfigured: Just give it power & it will start transmitting GPS data on tx pin
- Compatible with Arduino PIC AVR etc
- Export & view on Google Maps
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 12V
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 12V
- Input Voltage: DC 12V
- Operating Voltage: 1 – 250 V
- RF Frequency: 433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold separately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
SKU: n/a - Arduino, Arduino Components, Modules, Programmer Components, Programmers
MAX3232 RS232 to TTL Serial Port Converter Module DB9 Connector
Arduino, Arduino Components, Modules, Programmer Components, ProgrammersMAX3232 RS232 to TTL Serial Port Converter Module DB9 Connector
- Communications chip: Domestic MAX3232
- Operating voltage: 3.3V-5.5V
- It is widely used in radio modification, phone flash , GPS ,vehicle detection,DVD flash, hard disk repair set-top box upgrade
- It can be used to program STC MCU, NXP MCU, Renesas MCU,STM32 MCU, N+-2EC MCU Communication
- chip: domestic MAX3232
- Port: TX RX VCC GND
SKU: n/a - Arduino Components, Modules, Power, Tools
Digital Voltmeter Panel LED Display 3-30V DC
- Feature:Reverse Connect Protection
- Range: DC3.0-30V (No need aditional power)
- Display: Three 0.56” LED digital tube
- Display color: red
- Refresh rate: about 500mS / times
- Input: DC voltage (<2 times the range)
- Resolution: 1% +1 digit
- Power Supply: DC3.0-30V (with the input common-line)
- Operating temperature: -10°c~ 65°c
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz RF Wireless Remote Control 2 Channel
- This remote control only support the learning code (1527) of the receiver
- It can not clone other remote controls, it is only 1527 encoded remote control. (Fixed Code)
- Can only match the 1527 learning code receiver.
- Application: (Partial)
- Garage doors access control system
- Electronic gates access control system
- Electrical appliances control
- Vehicle central locking systems
- Car sunroofs control
- Heating systems control
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
M590E GPRS GSM Module Dual Band DIY
M590E GPRS GSM Module Dual Band (UnSoldered)
- This is UnSoldered (do it yourself) KIT
- Chip: M590E
- Voltage: 5v
- Best for SMS GPRS
- Support networks: GSM 900 & GSM 1800 Network
- Module size: 50mm*50mm
- TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
- Power module automatically boot on home network
- Onboard status LED.
SKU: n/a - Arduino, Arduino Components, Display, Modules
I2C Interface Plate for LCD Display Module
- I2C Address: 0x27
- Supply voltage: 5V
- Dimension: 41.5mm*19mm*15.3mm
- The Backlight and contrast is adjusted by Potentiometer
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 1602 16×2 2004 20×4 20×2 Character LCD Display
SKU: n/a - Arduino, Arduino Components, Modules
TTL To RS485 Industrial Converter with Lightening Protection
- Industrial Grade TTL to RS485
- On-board TTL to RS-485 converter chip
- Bi-Directional TVS transient Suppression Diode
- RS485 Lightening Protection design (Surge Protection)
- onboard 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication
- All of the pins can be controlled by the microcontroller operation (3.3 or 5v TTL)
- Working voltage : 3.0~30v DC
SKU: n/a - Arduino, Arduino Components, Modules
TTL to RS485 MAX485 Converter
- on-board MAX-485 chip , is a tool for RS-485 communications , low-power , Slow-Rate Transceiver
- onboard 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication
- the chip has drawn all of the pins can be controlled by the microcontroller operation
- Working voltage : 5V
SKU: n/a